Bakelite has various uses in the industry; One of the most important bakelite uses is the production of electronic components. These parts break down after several years of use and need to be recovered. Bakelite restoring is very important; Because this substance loses its properties over time. So stay with us until the end of this PETROPROVIDERS article to introduce you to bakelite restoring.

What is Bakelite? What are the most important uses of bakelite?

It is a plastic material whose production and development became very important in the twentieth century. This material is used to produce a variety of durable products. For example, bakelite can be used to produce a variety of electrical and thermal insulators. In various industries, bakelite is mentioned as a strength enhancer for plastic products.

Bakelite was first made more than a century ago. It was produced in New York City at the time. It should be noted that after the production of this substance, its consumers used it in various ways. For example, it was also used to make a variety of durable plastic products in the automotive and aerospace industries.

It should be noted that bakelite has interesting properties; Some of these features are:

  • Suitable thermal resistance in various applications
  • Good electrical insulation
  • Diverse applications
  • Good molding capability
  • Generalizable physical properties
  • Good restore capability

Bakelite restoring is one of the most important features that you should consider when using this material. This material is used in various industries, one of which is the production of home appliances and electrical components. In addition to durable properties, this plastic material also has insulating properties. Bakelite is used to produce building insulation. It should be noted that if bakelite is used in the production of home appliance insulation, it can increase the strength of these materials and increase their service life.

In this article, we are going to take a full look at bakelite restoration. So stay with us until the end of this article and have your bakelite device in your hand!

Review of bakelite restoring steps; Step by Step!

Bakelite screws

Bakelite screws

We know that different parts lose their luminosity overtime against oxygen in the air as well as sunlight. Now there are various ways to increase the brightness of these materials that can be used to eliminate all contaminants on the bakelite.

In the following, we want to tell you the interesting tips and steps of bakelite restoring. Once you know your bakery, hold it in your hands. Then follow this recipe to make the bakelite shine like the first day.

So if you have bakelite plastic and you do not know how to clean it, stay tuned for the rest of the article. You can put it in water to find out if the material is bakelite. First, increase the water temperature and then put the material in it. If your product smells like milk, it’s not bakelite! But if it smells like formaldehyde, it is bakelite.

Here are the steps to follow for bakelite restoring:

Step 1 of Bakelite restoring: Separate the bakelite from the various pieces!

We know that bakelite is used to make a variety of appliances; One of the most important uses of bakelite is to make lamp covers. This cover is made of bakelite and has good resistance to heat; But after a few years of use, it becomes cloudy. In this article, we are going to restore a lamp!

Very important point! Try wearing a mask and gloves before starting work; Because old bakelite was made using formaldehyde and asbestos, it can damage the health of your lungs and lungs. If you want to buy Iran Bakelite without asbestos and formaldehyde, you can contact our specialists.

To begin the process, you must first turn off the power and then loosen the bolts of the lamp. Then you have to remove the bakelite piece and hold it in your hands! After that, do the following steps.

Unscrew the screws that hold the bakelite in place. You can use your hands or tools such as a screwdriver to do this.

If you see that these screws are rusted, put them in a stainless steel material; Then let these screws stay in the material for 30 minutes. You can then continue the steps.

Step 2, Choose the right cleaner to clean the bakelite!

bakelite cleaning

bakelite cleaning

To clean bakelite, you must first choose a suitable cleaner. It is important to note that this cleanser should not be a strong acid; Because it may affect bakelite and change its properties. So it is better to use a non-acidic detergent; For example, you can use window cleaning foam.

The foam removes dirt from the bakelite well, in addition, it does not harm the resistance of bakelite and its properties! After unscrewing the bakelite screws, you will see that this material is very dirty; Because it has been used for years and no one has looked at it! Follow the steps below to clean it well:

  • First, remove your soap or detergent.
  • Spray the substance on the bakelite and leave it for a few minutes.
  • Clean the bakelite; You can use a dry cloth to do this.

Step 3 of Bakelite restoring: Using sandpaper, Sand the bakelite!

bakelite resoting and grindering

bakelite resoting and grindering

At this stage, you should use manual and automatic sandpaper to shave the bakelite surface. You can also use industrial grinders. This causes the bakelite to lose its matte surface and become slightly shiny; This is what we want! To do this step of Bakelite restoring, follow these steps:

  1. First, test the integrity of your rotary abrasive. Then add a firming agent; For example, you can use polish.
  2. Put the bakelite on the wheel and press it. Be aware that if too much pressure is applied, it may break. Then gently press it on the wheel.
  3. Do not hold the bakelite steady! This eliminates the color of the bakelite by polishing; So you can shake it gently so that it does not heat up at one point.
  4. Do this until the bakelite oxide coating is removed.
  5. At the end of this stage of Bakelite restoring, your Bakelite should shine well. If you do not get results, you can contact our experts.

Step 4: Sand the bakelite by hand.

At this stage, you have to do it manually! You can use some grease as well as Brasso to do this. To do this, do the following:

  • First, take some grease (you can choose Brasso) and put it on the bakelite. This may take some time; Get a little bored!
  • Use a dry cloth to clean the grease; This will increase the brightness of Bakelite Iran many times over!
  • Then repeat for the screws.
  • You can repeat this step after drying the bakelite to increase the yield.
  • Clean any spots of stained bakelite with more grease!

Step 5 of Bakelite restoring: Your job is almost done!

bakelite manual polishing

bakelite manual polishing

At this stage you have to take the final steps; To do this, you can follow the steps below:

  1. Remove all rust as well as stains from screws and bakelite.
  2. Then replace the screws.
  3. For more satisfaction, you can add polish to the final set! Then your job is done!

A summary of Bakelite restoring training in a simple way!

In this article from PETROPROVIDERS, we have explained Bakelite restoring training to you. We said that bakelites have different uses; The use of bakelite is very popular in the electrical industry and the manufacture of home appliances. This substance stains after many years of use and the effects of oxidation remain on it.

To solve these problems, you can use a detergent and then spray it on bakelite. After that, you can choose a polishing material and polish the bakelite on the sanding machine. After that, you can sand this material by hand, and finally, wherever you see a stain, you can clean it with grease or Brasso.

What do you think about Bakelite restoring? Have you ever cleaned your bakelite? After using this method, did your bakelite shine like the first day !? Do you have any other ways to make bakelite shine? You can share your comments with us in the comments section and you can also ask your questions from our experts. To buy Iran Bakelite with the best quality, you can contact us.


What is Bakelite?

Bakelite is a thermoplastic that has various applications in various industries. This material is resistant to electricity and heat.

What are the uses of bakelite?

Bakelite is used in the production of durable plastics in the automotive, plastics, aircraft, and electrical industries.

Why does bakelite become cloudy?

After using bakelite, the substance is oxidized in sunlight and oxygen in the air; Then it becomes cloudy!

How to make bakelite shine?

Using polishing and sanding methods, you can make the bakelite shine like the first day.

How to buy high-quality bakelite?

To buy Iran Bakelite with the highest quality, contact our experts.