polymer products are one of the largest industries in the world. In general, human life becomes easier with the production of polymers. It should be noted that polymer products must be made with the standard and principled methods. If the methods of producing polymers are not standard, the products produced will be worthless.

By producing high-quality polymers, you can have a healthier and easier life. In addition, these polymers are resistant to UV rays. In general, to make quality polymers, polymer production standards must be observed. In the continuation of this PetroProviders article, join us to introduce you to polymer products.

The main properties of polymers and plastics

Plastics and polymers have special properties. Some of these popular materials are sticky and others are impact and pressure resistant. In addition, polymers are resistant to temperature changes and can be used as thermal insulation. These materials have special strain properties and are flexible against various pressures. While metals and ceramics do not have flexibility. This makes polymer products much more popular.

If the polymer ingredients are not selected correctly, it may lead to the production of dangerous products! Also in the production process of polymers, standard conditions must be observed to produce less environmental pollution. Knowing the properties of polymers and their manufacturing methods makes polymers have very good quality.

If you follow the production methods of polymers and plastics but do not have quality raw materials, the quality of plastics and polymers produced will be very low! In the production of polymers, you must also consider the cost parameter. If necessary, be sure to use expensive polymers to be able to produce your desired products.

Selecting the best materials for making polymer products

making polymer products

making polymer products

Raw materials and their selection are the most important step in making polymers. These materials have special properties and can be resistant to impact and heat. These plastics have many applications and can be used to remove contamination from other products.

In general, there are three main materials for the production of polymers. These three materials have special properties and are used to produce different polymers. These 3 main ingredients are:

Rubber styrene-butadiene or SBR

One of the cheapest materials for polymer production is SBR. This material is very suitable for producing polymer products. Globally, the use of SBR is very popular. It should also be noted that many manufacturers around the world use this substance. It is inexpensive but has little resistance to chemicals. Important benefits of styrene-butadiene rubber include:

  • Abrasion resistance with other objects
  • Relative impact resistance
  • Adhesion to metals and solids
  • Resistance to very high and very low temperatures (SBR is resistant to -65 to 180 ° C!)

Silicon

Silicon

Silicon

One of the most common and best materials for polymer production is silicon. This material is used all over the world to produce polymer products. In addition, it should be noted that the cost of purchasing and using silicone is very high. But this material has very wonderful properties with which you can produce very high-quality polymers. Other properties of silicone include:

  • Compression resistance
  • Not harmful to the ozone layer
  • Resistance to wear and tear
  • Resistance to ultraviolet rays
  • Resistance to very low and very high temperatures (silicon is resistant to -65 to 260 degrees Celsius!)

Fluoro-silicon

One of the most expensive materials for making polymer products is fluoro silicon. This material has a very high resistance and can also be resistant to fire. If your polymer is made of fluoro silicon, even burning gasoline or oil on it will not change the quality and material of the polymer!

This material is used in the aerospace industry and astronauts are the biggest consumers of fluoro silicone! Other features of this article are:

  • Being fragrant
  • Having chlorine in the composition
  • Resistance to oils
  • Resistance to industrial and chemical solvents
  • Resistance to gasoline and oil
  • Resistance to climate change
  • Sunlight resistance
  • Not harmful to the ozone layer
  • Resistance to low temperatures and high temperatures (fluoro silicone is resistant to temperatures of -29 to 176 ° C!)

Due to these three main materials in the production of polymers and plastic products, there are different methods for making polymers. Follow these tips in future PetroProviders articles.

Summary of familiarity with polymer products and their production

In this article, we saw the materials needed to produce polymer products. In general, polymers are very durable materials that can be used in various industries. These materials are of high quality and can be used to make various plastic materials.

Polymers have a variety of uses; For example, polystyrenes are a type of polymer used in various plastics and building insulation industries. The raw materials for the production of polymers are of three types: SBR, silicon, and fluoro silicon. We said that the most expensive raw material for the production of polymers is fluoro silicon. This material has very high strength and has many more advantages than other raw materials. In addition, silicon is expensive and has very good resistance to very low and high temperatures. SBR is one of the cheapest raw materials for making polymer products. This material is also very durable and has various uses.